How to configure a Cisco 7970 IP Phone

[manderson]

I'm trying to use a Cisco 7970 IP Phone as an Epygi extension but If I go to the WEB manager of the phone I can't find where to enter the SIP parameters. right now it only shows me a lot of different parameters in the phone but I can´t modify any info.

[megatron]

Is the phone in SIP mode or is it in the CISCO STANDARD of " SKINNY "

[manderson]

It was in CISCO protocol, but finally I was able to replace the firmware with SIP, of course I don't have call manager, so it made it very difficult to create the configuration file. After a lot of research I was able to make it work with the Quadro and it works fine, it is a very nice telephone.


I'm trying to find out how to configure the WEB based services for the CISCO 7970 IP Phone, if somebody knows how, I will apreciate your help.


If somebody else has this phone and needs help to make it work with the epygi, I will be glad to help.

[sharkbyte]

I've just bought one of these and am dying to get it working with the quadro2x.

Anyone had any success?

[stakano]

My 7960G's work perfectly... though it looks great on my desk, I'm missing features like Paging.

Any questions, feel free to contact me.

[edgarlopes]

All Cisco Phones are configured with xml files through a TFTP server.


I have 2 Ciscos 7970 working perfectly, you just need to have the files.


To have a complete configuration with all the settings you need 3 files to load on the phone.


If you want I can send you the files by e-mail, or if possible I post it here


BR


Edgar Lopes