Filtering PSTN outgoing calls

[daycohost]

Hello, I've been working with a Quadro 16x and I'd like to configure a call route to make a PSTN call but only troughthree specifics FXO (FXO 1, FXO 2 and FXO 3) even when the FXO 4 is enabled. Is there any way to do this? Edited by: daycohost

[davrays]

Of course, there is a way.


You'll need to create three routing rules with the same pattern (lets say "3?*"), and call type set to "FXO".


The first rule should have "Port ID:"=FXO1 and "Fail Reason:"=Any


second: "Port ID:"=FXO2 and "Fail Reason:"=Any


third:"Port ID:"=FXO3 and "Fail Reason:"=None


System will sequentially try to call through FXO 1, 2then 3.