baoan
05-01-2007, 06:20 AM
HEllo Everyone,
I wonderring if Anyone herehas setting NAT Traversal To have Full Cone NAT fromQuadro16x throught Symantec Security Gateway 1620 (SGS-1620). I try to foward Port UPD=5060 and RTP=6000-6099.
The SGS1620 Have:
Two (2) DSL connect to it, both DSL line have there old STATIC IP. The SGS1620 Have Load Balancing on the DSL Lines(50/50). On the Quadro NAT Traversal Setting for SIP , i selected the option "Force" and on SIP and RTP Parameters, i use Manual NAT setting and put the IP of the Router (SGS1620).
Thank's for helping.
Bao-An
I wonderring if Anyone herehas setting NAT Traversal To have Full Cone NAT fromQuadro16x throught Symantec Security Gateway 1620 (SGS-1620). I try to foward Port UPD=5060 and RTP=6000-6099.
The SGS1620 Have:
Two (2) DSL connect to it, both DSL line have there old STATIC IP. The SGS1620 Have Load Balancing on the DSL Lines(50/50). On the Quadro NAT Traversal Setting for SIP , i selected the option "Force" and on SIP and RTP Parameters, i use Manual NAT setting and put the IP of the Router (SGS1620).
Thank's for helping.
Bao-An