Linksys SPA962 SIP Phone compatibility

[shagan]

Has anyone tested & used the Linksys SPA962 SIP Color Phone? Please advise!





http://www.linksys.com/servlet/Satellite?c=L_Promotion_C2&am p;childpagename=US%2FLayout&cid=1162878004771&page na me=Linksys%2FCommon%2FVisitorWrapper&lid=047712777 3L02

[dmaunder]

Yes they work well.

These phones are actually quite easy to make work. you just setup them up in the Quadro as Sipura841 and enter the MAC address as normal.

Then you then need to go to the Provisioning tab on the phone and set the Profile Rule to /spa841.cfg and then reboot the phone, that is it. The phone will then be auto-provisioned from the Quadro. This will work for any linksys model.

[AramK]

Thanks for the provided workaround. Hopefully this will not harm the phones autoprovisioned by Quadro. I doubt that certine fetaures will not work on the phone with spa841 config loaded, as there are some differences between these model for sure. This is not tested in Epygi lab, so we can't guarantee anything.

[Alloy Service]

Has anyone had issues with one-way audio using a pickup group with linksys phones? Scenario: incoming call rings and a linksys phone tries to answer the call by dialing the pickup group. The audio on the call is one way. Snom phones on the same site get 2 way audio with the same scenario.

[davrays]

We have Linksys SPA922 and SPA942 in the testlab, and they behave normally when using pickup. Must be something on yout phones config.