Outbound calls to next available line

[Synertic]

How to configur the quadro to find the next available VoIP line.

My VoIP provider give me 5 channel by DID. I have 3 DID (15 call) I'm tired to try all DID line to make a call. Can you add the option to set cascading line for outbond call.
ex:

when the all 5 channel are busy the systeme take automatically the next line

[awhite]

You can add 3 identical entries in the Call Routing table that are different only by the Use Extn Settings. Also, be sure to set the Fail Reason to Any. This is the option that will allow the Quadro to find another matching call routing entry if the 1st or 2ndattempted call path fails.







14
Enabled
9*

SIP
sip.epygi.com:5060
Any




No
*
PBX

UES: 77
URP: No
10



15
Enabled
9*

SIP
sip.epygi.com:5060
Any




No
*
PBX

UES: 76
URP: No
10



16
Enabled
9*

SIP
sip.epygi.com:5060
Any




No
*
PBX

UES: 75
URP: No
10
Edited by: awhite

[Synertic]

Can add only 3 identical entries in the Call Routing table or as no limit

[davrays]

There is no specific limit on this. Of course, if you add 50-100 rules, other problems may arise, but 5-10 identical rules are completely ok.