6L pppoe and allow large fragmented udp packets ?

[huwcom]

Our 6L currently has a connection to an adsl line (pppoa) running behind a NAT router.

We are using VoIP Unlimited as the ITSP and for inbound calls to work we must set our router to allow large fragmented udp packets.

We are intending to move the 6L onto a dedicated adsl line with a modem (Vigor 120) acting as a pppoa>pppoe bridge. We would then set the 6L to pppoe mode.

My question is, is there an option on the Epygi 6L to allow large fragmented UDP packets when running pppoe ?

thank you.

[KSComs]

Our 6L currently has a connection to an adsl line (pppoa) running behind a NAT router.

We are using VoIP Unlimited as the ITSP and for inbound calls to work we must set our router to allow large fragmented udp packets.

We are intending to move the 6L onto a dedicated adsl line with a modem (Vigor 120) acting as a pppoa>pppoe bridge. We would then set the 6L to pppoe mode.

My question is, is there an option on the Epygi 6L to allow large fragmented UDP packets when running pppoe ?

thank you.

If this is a shared internet service then I would suggest to get the Vigor to do all of the connecting and QOS and let the Epygi just be a telephone system - its great as that.

KISS Principal


Kevin