Dialing out via sip

[derekkmark]

I know this may be a silly question but I cannot find the answer


I have a 16x and would like the 16 pot's to dial out via the sip account attached to each extension, I can do it on the snom phones but cannot see away on a standard phone


If you dial you dial the local pbx numbers


does anyone know of the code to be inserted to allow the extension to dial out via the sip account and not the pbx

[wesleyit]

call routing, add new entry
pattern = *
call type=ip-pstn
metric=10
description=call sip from pot
tick filter on call/etc,
hit NEXT
fill in your sip details, eg host, port, username, password
tick 'allow multiple logons'
tick 'use rtp proxy'
hit NEXT
inbound call type=PBX
NEXT, FINISH

[derekkmark]

Thanks but not sure if I need to do something else as it still is not working, it wont let you use the * on its own as you need to dial 0 at the start of the phone number and *0 is for the mail box so did 84* and removed two digits just get the message number is not available


Many thanks

[derekkmark]

Hi


Many thanks for all the help but even the tec dep did not get it correct after I e-mailed them, but I got it working by playing so now can setup different codes for different people to accesseach voip account, and then dial out, also I an restrict which extension can dial out oneach voipaccount