rhysw
02-07-2007, 04:54 PM
Hi,
I'm having problems with x-lite version 3 build 34025. I've tried to follow the example pdf docs X-LiteConfig-MedRes.pdf and Xlite-with-EPYGI-E2.pdf but these are for much older versions of x-lite.
I'm connecting to the Lan side of the quadro. Registration as an extension is fine, and I can make outbound calls.
However, if some connect via the PSTN (FXO port), I can hear them but they can't hear me. I have confirmed that the packets are reaching the quadro in the 80xx range - it seems the x-lite is not sending the audio packets to the quadro.
The set up I have is an ADSL modem on a fixed IP address, with a DMZ pointing to the quadro.
I don't believe that pin holes are neccessary, as the quadro should be recieving and sending the call as it is configured as the proxy address in the x-lite. ( I have tried this too with no avail!)
Help!
Thanks
Rhys
I'm having problems with x-lite version 3 build 34025. I've tried to follow the example pdf docs X-LiteConfig-MedRes.pdf and Xlite-with-EPYGI-E2.pdf but these are for much older versions of x-lite.
I'm connecting to the Lan side of the quadro. Registration as an extension is fine, and I can make outbound calls.
However, if some connect via the PSTN (FXO port), I can hear them but they can't hear me. I have confirmed that the packets are reaching the quadro in the 80xx range - it seems the x-lite is not sending the audio packets to the quadro.
The set up I have is an ADSL modem on a fixed IP address, with a DMZ pointing to the quadro.
I don't believe that pin holes are neccessary, as the quadro should be recieving and sending the call as it is configured as the proxy address in the x-lite. ( I have tried this too with no avail!)
Help!
Thanks
Rhys