Management Access Port

[threebit]

Hi,
It would be useful to be able to change the port that the Quadro listens on for management access (from the WAN side).

A customer required both ports 80 (HTTP) & 443 (HTTPS). So the only Management access possible (as far as I can see) is via VPN.

Thanks

[Avetik]

Hi,
You can solve problem by doing the following:
Type "http://172.30.0.1/advanced.cgi" at Your browser's address field, where 172.30.0.1 - is IP address of Quadro.
From there it's possible to change both ports You mentioned.


Edited by: Avetik

[threebit]

Thanks, most appreciated.