Call routing based on incoming DID [Archive]

wesleyit

11-23-2006, 04:03 PM

Hoping someone has conquered this and could lend a hand..

Using a quadro 16x, and a handful of DID numbers hooked to one SIP extension, how would one go about routing to PBX extensions based on the DID number dialed?

I have tried with no success. Do I need to ensure at the provider end that the DIDs are being supplied in the original incoming SIP headers? Is there a way of logging/viewing such incoming packets? Call statistics only shows the final destination, but no 'dialed' ID as such.

Frontier

11-23-2006, 11:58 PM

Hoping someone has conquered this and could lend a hand..

Using a quadro 16x, and a handful of DID numbers hooked to one SIP extension, how would one go about routing to PBX extensions based on the DID number dialed?

I have tried with no success. Do I need to ensure at the provider end that the DIDs are being supplied in the original incoming SIP headers? Is there a way of logging/viewing such incoming packets? Call statistics only shows the final destination, but no 'dialed' ID as such.

threebit

11-26-2006, 10:51 AM

Check out the document in the download area that relates to using a Quadro with the CBeyond service. Following this document I was able to setup our SIP DID numbers.

wesleyit

12-03-2006, 08:15 PM

thanks, I have tried a couple of configurations now.

I have checked my SIP logs and and it seems that it is the SIP provider not giving me the dialed DID. They use asterisk, and it seems to be taking them a while to figure it out.

Any info about it being easy to turn this on in asterisk, and any epygi SIP logs where a dialed DID is being displayed would help me too, so i know where to look.

Cheers