Deployment - Dial out timer

[KSComs]

Hey there,

I would like to strongly request that an alteration to all firmware revisions is made to the "DIAL OUT" timer deployment to the handsets.

I believe that it needs to be removed from the handset and to allow the user adjust the dial out timer manually so they can set the dial out on an as needs basis.

Or make it so that it is deployable on a handset by handset basis and you can adjust it at a whim rather than having to DEFAULT the handset so it then pulls the configuration, this is a pain when you are running static ip addresses and 2 x subnets over the same physical ethernet topology.

Regards

Kev

[davrays]

Kevin, sorry, but I don't get what you are talking about... :)

Are you talking about the "Routing Dial Timeout" at the "Telephony"->"Dial Timeout" page, which is then set on the autoconfigured phones or about something else?

[KSComs]

talking about the "Routing Dial Timeout" at the "Telephony"->"Dial Timeout" page, which is then set on the autoconfigured phones?

See my Aussie speak isnt that bad !!!

You are getting better with it too.... now all i have to do is get you some good Aussie Vino to hit your door step... that might help your vocal chords !!!

;)

Kev