- FXS 16 port gateway
- Connecting 2 Quadro 2x together
- connecting a analog door phone to FXS port of a quadro 2X
- Call Routing on Quadro using "Route all incoming SIP calls to Call Routing" option
- Call Routing on Quadro using "Route all incoming SIP calls to Call Routing" option
- Voice Mail URI
- Global Speed Dial Directory
- F/ware upgrady time
- Strange Problem / Quirk Wth AA.
- How do I connect to the epigy from outside?
- Remote extension installed to a VIP client
- Are 2 External Gateways possible on the Epygi?
- Does 16xi support Tapi?
- Help Configure Portech MV-372 in Epygi 2XI
- Outgoing Caller ID????
- Problem routing DID to specific extencion
- PIN Code Dialing
- link line keys to specific fxo service
- Hot Desking and incoming calls
- Custom Scenario. Is this possible?
- automatically dial prefix when dialing out
- upload own messages
- changing default extension's
- Dynamic DNS with no-ip
- VLAN support
- Radius / Call Accounting - Cannot get Client Codes
- T.38 Setup to Unnified Fax
- Multiple AA
- Epygi IP SIP rego / security - all platforms
- Ringing Announcement
- Inbound routing help
- Auto attendant options...
- Recycling AA Digits on CRT
- Epygi 4x & GrandStream GXP 2000 - Distinctive Ringing Setup
- Emails sent by epygi : changing the subject of the emails
- Pass the CLI from VISP to Remote user
- Send Caller to On Hold Music Immediately/Without answering phone call
- All calls being diverted to one extension at a certain time
- Using Caller ID to direct call to xtension
- Caller ID @ Call Relay
- Voice mail
- Call Routing: 1 MSN to multiple EXTENSIONS
- Remote Extensions setup
- PSTN on Quadro with VOIP
- Weird Outbound Caller ID Issue
- Voice message "Please wait, we are trying to contact the person you are calling to"
- Seperate SIP accounts for incoming and outgoing
- Outbound Caller ID
- Calling SIP, PSTN, subscribers exception on call routing rules
- SIP Access Blocking via filtering Rules
- How do we use the new *82 feature
- 4X Model
- Quadro2x
- Quadro 4x behind a router
- Quadro 4x behind a router
- Quadro Public Directory
- Stupid (probably) dial plan question.
- Siemens S685 config
- Dial using the Windows Phone Dialler
- Hot Desk and Remote Extension
- Auto Answer and Put Call on Hold`
- Line Pool
- 486 Busy Here
- Calling missed calls from Snom 300
- Turn off Ring Before Page?
- 6 Port FXO Expansion Unit Query.
- quadro 6l not displaying incoming fxo number
- Watchguard + Quodro 4x NATing problem
- Reading VM of Virtual Extension
- Configure a Snom 370 for a Quadro 6l
- Lynksys pap2
- How to bypass voip blockage from ISP in Blocking Countries?
- Configure an internal sip trunk with other ipbx
- Swap IP Phones in a 16X
- Remote extensions wihout a local handset
- Multiple Remote Extensions at single site.
- Faxing with Quadro 16x
- External VoiceMail Server
- How to Schecule an automatic weekly reboot
- External Bell
- Call Forwarding on Virtual Extension.
- How Can I Disable DND Button on Polycom 601
- Quadro4x
- Quadro 2X and GXW4104
- Remote extension on N95 caller representation problem
- Where do I find the option for fax pasthrough
- Routing for incoming IP-pstn call
- simple snom M3 setup
- VXML Forwarding Menu
- Hacking attempts
- Quadro4x
- Quadro6L - Make group of extensions ring + call out on particular FXO
- Manual ITSP receiving 404
- E1 trunk traffic absorber
- *4 via the click-to-dial interface
- Open Door Lock
- QUADRO6L + SPA942's - Bind line buttons to FXO?
- Configure RTP Music On Hold for ALL extensions
- DynDNS setup on Quadro6L plz!
- Remote 4x firmware upgrade, can it be done?
- Multiple remote extensions at a single location
- Setting DSCP codepoints
- SIP for android (remote extension)
- Epygi Quadro 16Xi and Quadro FXO gateway scenario?
- Quadro 16Xi + Quadro FXO and FAX on any line?
- Call routes to a ring group ext. Redirect Fax?
- Pickup Groups
- custom voice for local aaa table
- incoming DDI calls from Quadro4Li to legacy PBX
- recording call queue/attendant messages
- CO Hookflash
- snom call deflection
- Smr (or ACD custom queue)
- Outbound calls from 2xi ISDN to FXO
- External data base
- simultaneous ringing of remote extensions
- Snom 300 external provisioning server
- Setup Auto Attendant to dial an outside number on demand?
- User option for extension to go directly to voicemail?
- clicktodial.cgi authentication
- Local SRTP with insecure ITSP
- put a call on hold and transfer to another ext
- VM Playback with phone number displayed
- click2dial.cgi automation script
- call back to extension from
- ISDN - No Incoming CLID on 2xi
- HELP! 3 snom m9 with quadro 2xi
- ACD Custom Queue Messages
- Simple voicemail retrieval
- Auto Attendant and call routing (Press 1 instead of ext11)
- call "hunting" to mobile phones
- Display Ext Caller ID on Registration, How do I?
- External Music On Hold
- Number dialed temporarily unavailable
- IQall set up on Quadro M26x
- Need help for DIDs on M32x
- Configure Quadro M8L and Phones to have Phones on WAN
- IP Phone through Site to site VPN
- VXML with Half Hour Time Period
- Call routing between two offices
- Auto Attendant Help
- Monitor Off-Hook Status?
- Monitor extensions of other quadro
- IP lines registration
- Configure Quadro 2xi for use with ONLY VOIP
- How do i set up Isip on a Quadro M26
- Global Speed Dial Directory
- How to have an extension pickup the fxo line when going offhook
- Setup 2 Quadro 2xi PBXs on same LAN
- Get exchange 2010 to be my voicemail box
- Inbound calls to all extensions (or 'I feel stupid')
- X-Lite on Quadro 4x
- CDR Question
- Client Code Rule for billing
- IP Fax Driver or a Fax Modem?
- PIN Codes on Call Logs.
- Surfcom
- Date time rule: every 2nd saturday
- SIP re-registration
- Upgrage to new Firmware 5.2.?
- Login to Epygi GUI as Extension Password
- Caller ID
- DID numbers
- Hear name before being transfer
- Quadro and loudspeakers\paging system
- Connecting Quadro 4Li to legacy BP250 PBX
- Stun
- Paiging all extensions
- Voiceblue lite
- "No Work Today" annoucement
- Spa 3102 Gateway
- Newbie - Quadro 2x attendants based on time
- Remote location has a different area code
- Day / Night Toggle No Time Conditions
- Line Appearance/Line status indication?
- Quadro M8L caller id enable
- Pickup Extension from command
- Use 2X as SIP trunk pass through WAN to LAN?
- Call routing
- Call Scenario
- ISDN to FXO adapter
- Voice mail for Attendant
- Modifying default AA
- Problem with memory space
- Time Service NTP on Quadro WAN Port
- Voice mail box Profiles
- Voip apps
- Allow senior users to upload new greetings
- 2 cellphones ring simultaneously
- Watched Extensions from remote phone
- Intercom several phones at one time
- AASTRA - disable missed calls/edit mac.cfg?
- Auto Provision Snom phones using DNS hostname as registra
- Hold Music settings
- Show the name of the SIP account in the display for incoming calls
- Simultaneous Ring
- So, I now have a Quadro 2x and a couple of Snom phones...
- Delay before auto attendant cuts in
- Listen to Voicemail files and recordings
- Caller ID and DID
- voice mail duration
- Yealink T-28 DSS keys on analogue trunk
- Trunk
- Full cone NAT
- Telstra Duet
- EMS Streaming music to WAN interface
- Any Ideas ?
- Quadro2x Question
- Polycom Firmware on 2x
- Snom 821 call hunting
- Compatibility with Grandstream 2124
- 32x in Redundant Mode
- IP-PSTN calls from Lync via ML8
- Extensions
- Manage IP Phone Templates - where?
- Xfer and Caller ID